• Flow rate at 50Hz up to 4350ml/min at 290rpm
• Clutched rotor for rapid and effortless tube loading
• IP54 protection
• 24-hour-duty rated, one-year full warranty
• Chemical and knock-resistant finish
• Accepts six tube bore sizes without adjustment. 2.4mm thick wall tubing for higher pressure or higher viscosities.

New 520R2 pumphead features PPS (Polyphenlene sulfide) track and rotor with stainless steel occlusion rollers to resist chemical attack and abrasive wear.

The 520FAM/R2 has been introduced to the 500 series OEM range as a high quality, single channel OEM pump and is made up of a 520R2 spring-loaded pumphead, an induction motor, gearbox, and a faceplate. These pumps are available in a choice of two voltages 110-115V or 220-240V and four speeds, providing flow rates up to 4300 ml/min from 9.6mm bore tubing (5250 ml/min when used at 60Hz). All 520FAM/R2 OEM pumps are suitable for use with either 50 or 60Hz supplies and may be wired to give either clockwise or anticlockwise rotation. For 2 to 4 bar (30 to 60 psi) operation, a 520R2G pumphead fitted with Sta-Pure® or Chem.Sure® tubing must be used. The 501RL2CG pumphead accepts 2.4mm wall thickness tubing for viscous product handling.

For help in selecting a suitable pump for your application, please call 01326 370363 and speak to our application specialists.

If outside the United Kingdom, find your nearest representative under international contacts.